Yi hacked resolution 2304x1296 30fps 35Mbits

[funnel]

Nice video and weather.

I just had some copy/pasting/macro fun and uploaded all possible video modes and default bitrates for fw 1.2.13. Just to make a little easier to find the addresses.

https://github.com/funneld/XiaomiYi...2.13-fw/set_all_bitrate_resolution_script.ash

 

[blacki2015]

what install script?? copy my micro sd? name file ? good job...?
please information

 

[Not-Exist]

Somebody can share a script with 35bitrate and 4Gb file split for 1080p and 1296p version 1.2.13?

 

[gente]

#2304x1296 30 fps 35mbps
writeb 0xC06CC426 0x02
writew 0xC05C1EB2 0x420C

#1920x1080 60 fps 35 mbps
writeb 0xC06CC426 0x03
writew 0xC05C1EE2 0x420C

#1920x1080 45 fps 35 mbps
writeb 0xC06CC426 0x04
writew 0xC05C1F12 0x420C

#1920x1080 30 fps 35 mbps
writeb 0xC06CC426 0x06
writew 0xC05C1F72 0x420C

#set file size to 4GB
sleep 3
writew 0xC03A8520 0x2004
sleep 1

...better to modify firmware by yourself or install that one from @Fried setting all high quality resolutions to 35mbits: https://dashcamtalk.com/forum/threads/xiaomi-yi-custom-firmware-with-lastest-revision.13557/
LG
Thomas

 

[Not-Exist]

Thanx again gente.
I dont know how to work with ash files, im searching for ready one.
About the firmware, im afraid to brick my camera.

 

[gente]

...@Not-Exist this script is setting your resolution to 1296p 30fps 35mbits and filesplitting to 4GB also it adjusts the sharpness, saturation, vibrance, exposure , gamma, scene mode and gives you a ready beep when all lines executed.
Copy the extracted autoexec.ash to the root directory of microsd!

LG
gente

 

[Not-Exist]

Thanx alot!!! Much appreciate.
Ill chek it later and report.

 

[gente]

Thanx alot!!! Much appreciate.
Ill chek it later and report.

i have edited post and uploaded an howto...

 

[blacki2015]

With me on 1.2.13 this script does not work , it works for atoexec for resolution of 1600x1200 ...
Help my )??

 

[blacki2015]

your setting autoexec for PAL ?? only NTSC ??
my cam fw 1.2.13 not job you file autoexec.ash
Why ??

 

[Not-Exist]

the script do give 35 bitrte, but the image quality is bad. First picture is without script and the other is with.
They are both screen capture from the video.

 

[gente]

your setting autoexec for PAL ?? only NTSC ??
my cam fw 1.2.13 not job you file autoexec.ash
Why ??

its all good on my cam with pal and with ntsc

 

[gente]

ok only for you script only resolution setting 1296p 30fps 35mbits,4GB splitting and ready beep without other lines for sharpness, exposure....

 

[Not-Exist]

Great, thanx alot

 

[blacki2015]

Thx )

 

[Rotceh]

thanks for the scripts guys i got a full edit done

Any other tips for better footage ?

i might play with some of the things i seen in the script posted on this page for sharpness, saturation, vibrance, exposure , gamma and see how that looks

 

[Fried]

the script do give 35 bitrte, but the image quality is bad. First picture is without script and the other is with.
They are both screen capture from the video.
View attachment 19022 View attachment 19023

try again ths script out in daylight, cause inside house with artificial light a bit noise will always come out...

 

[Not-Exist]

Ty ill try it. if i want 1080p with 60 fps and 35+ bitrate.. Both of the bitrates will work at the same ash file? Or for every resolution i need separate ash file?

 

[gente]

both work but not together, you need only set an hashtack(#) before that lines of resollution settings in script you don't want to start.
And remove hashtack from that resolution lines you want cam to start with. Use an editor like notepad++. I have posted here in nr.646 a text file howto use autoexec.

LG
gente

 

[blacki2015]

PAL or NTSC 30fps 2k??