I have CABAAA
after red screen with email address
I turned on with FWCARC10.bin sdcard.
after plugging in usb power cable, nothing comes on the screen, it's blank
only red light is on.
nothing happens, waited waited, nothing. pressing power button does nothing.
try turning it on with out any sd card, same black screen with only red light.
what happened?
Hi,I have problem after flash the dash cam, that become chinese text "system langauge adaption fail" (in english) after implementation in page one in this thread,
so i try download firmware update from here https://www.yitechnology.com/support/firmware_dash/id/3
1. i choose CA31A and Upgrade Firmware
2. downloaded file as name firmware.bin, i rename it as FWCARC10.bin
3. i turn off dashcam dan plug off cable
4. format SD Card as FAT32
5. copy file FWCARC10.bin (before-number 2) to SD CARD
6. insert to dashcam and then turn on/plug in cable
7. wait around 1 mnts and done. my dashcam become english
Did you able to back to CN serial?for everyone who got a CCBAA serial version and got a pink screen.
Just put your sd card back to your computer,
- re-edit the SN.txt and AAA222CCC.txt back to CN (you're changed it to US, dont you?).
- check to sure the serial number in two the file is same with your camera.
- put the card to the camera and power on, wait until you see the blue screen with right serial number.
remove card and format it with computer.
now done
you can aslo re-install CCBAA firmware with this link
http://www.xiaoyi.com/yi_dash_camera/download.html
Did you able to back to CN serial?
Since i get the access denide dam error msg i can not do nothing, and what about the "engmode" file? If you need the Chinese serial
for everyone who got a CCBAA serial version and got a pink screen.
Just put your sd card back to your computer,
- re-edit the SN.txt and AAA222CCC.txt back to CN (you're changed it to US, dont you?).
- check to sure the serial number in two the file is same with your camera.
- put the card to the camera and power on, wait until you see the blue screen with right serial number.
remove card and format it with computer.
now done
you can aslo re-install CCBAA firmware with this link
http://www.xiaoyi.com/yi_dash_camera/download.html
Hi, My SN in CABACA.
I changed the SN number from CN to US. I got my screen shows on the SN number with US. But I dont see any support email.
I turn off the cam.
Format the SD card. Copy the FWCARC10.bin file to SD Card.
But I can't able to power on the cam anymore.
Anyone know how to fix it?
Update:
Follow the steps on the 1st page until...
8. Format the SD card. Copy the FWCARC10.bin file to SD Card.
9. Plug in SD Card to cam.
10. Connect the power supply cable to cam. (Power supply must be turn on before plug in the cable to cam)
11. Don't worry if you don't see yellow light ON/flashing, as long as the red light is ON. Wait for few minutes (less than 5 mins).
12. Cam should be auto start after update the firmware. ++ DONE ++