NtkMPE 1.1.2 (Novatek bitrate editor)

But i don't understand why. In the past [i used 28000kbps] I've had some recordings with a video bitrate up to approx. 43000kBit/s (most at 30000-34000kBit/s).
So the limit should not be by the Hardware.
On the bitstream, the bitrate is variable and the recorder starts at 7,800, it rises only in complex scenes where there is no hardware limitation, and we make it permanent and start starts at 14,000, if you put 15,000, then there is already a limit.

Otherwise, I will do without the parking mode and set the bitrate up to 28000 kBit/s and get Videos with 28000-43000kBit/s
The bitrate above 14000 = 28000, it will not rise above, it will be a constant 28000
 
Last edited:
I'll try it the next days/weeks, if 26400kBit/s is good enough for me. Otherwise, I will do without the parking mode and set the bitrate up to 28000 kBit/s and get Videos with 28000-43000kBit/s
We have already tried, for 14000 not parking, we need to put less.

P.S. I need to correct the expo tables, but I do not know how.
 
Last edited:
We have already tried, for 14000 not parking, we need to put less.
I know, but if i don't need the parking mode... (because if i use it outside it records nearly without pause - here in northern germany it's windy very often and if there is a motion in the trees the record starts. or if there are clouds in the sky and the light situation is changed, it starts recording).
So i can do without parking mode, if i could use higher bitrates, for more details.
But first i have to try if i can read nearly all plate signs with 26400kBit/s (@FullHD 60fps).
 
Back
Top