Help Hard-wiring A129 to Nissan Rogue 2013?

As long as you have ATS.
They dont have to be 20A. Whichever one you found for hot and for ACC. Whatever it is is fine, could be any amp. You will usethe same fuse in the tap and add one (a 2A is good) for your dash cam. But make sure they are not complicated circuits. Example, dont f with the airbag. I would recommend the horn circuit as a possible alaway on circuit to be tapped. For ACC go with cig lighter or any spare outlet.
 
you replace whatever fuse was already there for the existing circuit in the tap, add a fuse for the camera, 5A is generally the smallest value you will find which is ok for the camera power
 
10A is a bit high, better to replace those when you can, remember the fuses are not there to protect the device, they're there to protect the vehicle
 
Back
Top