Please check your inbox message!I would like to receive also the low bitrate firmware. Thanks!
okan you please to send me the low bitrate parking mode firmware?
I will have a check thenAlso, in the google drive link provided in a previous post for auto-parking mode G-sensor 0614s firmware are two files (one directly and another one in a B1W folder). Which one is the recommended file for this version of firmware?
That’s what I figured but this was sold by blueskysea without any other instructions. Should I use the red or the yellow wire to hook into a constant power fuse?the hardwire kit instructions are for a different model camera, those functions don't apply on the B1W
In that case can I get the “double tap” firmware and also the auto parking firmware? Both of them for WiFi-off in parking mode. I still want WiFi to default on in normal operation.
Red wire to the always-on socket, Black wire to GND, Yellow wire Unconnected!If it cannot sense then how should I install? Just take the red wire to constant power and ignore the yellow?
You can load the Auto parking mode 20180614s version firmware, and PM you already, please check your inbox message!In that case can I get the “double tap” firmware and also the auto parking firmware? Both of them for WiFi-off in parking mode. I still want WiFi to default on in normal operation.
okHey @estore009
Can you send me the latest wifi-off firmware with parking mode? Is it still un released? Thanks
Samsung EVO Plus card is okay to work with B1W dashcam, you can format the card in the APP to remove some unknown files from the card.1. I got a lot of "SD Card low speed messages" - I'm with a Samsung 128GB EVO Plus rated at about 90MB/s, so it should be easily several times faster than needed. I simply disconnect and reconnect the power and it's fixed but still it's a major annoyance having to fiddle with the dash cam cable while driving.
Red wire to an always-on socket, black wire to GND, and let its yellow wire unconnected! It should cut off power automatically if the car battery voltage below the set-up value on the hardwire kit!2. My dash cam forgot its settings at least 3 times for the last weeks. It's connected using the recommended power adapter. One time it did it while I was restarting the camera due to "SD Card low speed". It simply continued blinking the led without emiting the shutdown sound and when I powered it back on it already forgot it settings. Also it forgot that it was a W-Fi off fimware and switched to Wi-Fi on meaning that I had to reflash it again. Not cool.
Already did that. Still getting the "SD Card low speed" messages. If I can restart and it continues normaly it's got to be a false positive from the software not the hardware.Samsung EVO Plus card is okay to work with B1W dashcam, you can format the card in the APP to remove some unknown files from the card.
My kit is connected properly and it works. The problem is that the camera forgets is settings from time to time. It did it once when I manually cut the power off from the usb cable myself to reset an SD Card low speed messege. It also revert itself from Wi-Fi off to Wi-Fi on mode somehow. When the power is off the camera should be able to poweroff with the remaining power in the capacitor and not loose all of its settings, right? That sound like a bug.Red wire to an always-on socket, black wire to GND, and let its yellow wire unconnected! It should cut off power automatically if the car battery voltage below the set-up value on the hardwire kit!
Hard to say it is the software problem since it can detect the card error. Maybe broken sections on the memory card.If I can restart and it continues normaly it's got to be a false positive from the software not the hardware
It should keep the settings after power off within 18 hours. You can contact the seller for replacement if it always loses time!When the power is off the camera should be able to poweroff with the remaining power in the capacitor and not loose all of its settings, right? That sound like a bug.
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
M | Parking mode issue | B1W | 4 | |
T | B1W: Parking mode wiring help needed please | B1W | 1 | |
J | Looking for a firmware with the iOS fix and parking mode | B1W | 2 | |
S | Parking mode? | B1W | 2 | |
C | Parking mode and battery pack | B1W | 5 |