55brianb
New Member
Hi all!
I'm having problems connecting a rear window camera (NBDVRS2RWC) to my front 322GW.
Upon plugging in the rear cam nothing happened except the main cam froze, showing the recording indicator stopped at 1 second. The power button didn’t work, nor did the screen or unplugging the cable. The only thing which worked was the reset button, but resetting gave the same results any time the rear camera was connected. Without the rear cam everything was fine.
Had an online chat with support who told me that it was probably my Sandisk SD card (U3 Class 10) and that I needed to use either a Nextbase branded card or Sandisk High Endurance. As the Nextbase wasn’t available I ordered the Sansisk and no change - still freezing with the rear camera connected.
I spent about an hour yesterday evening rebooting, reconnecting etc and am no further on.
The main cam has the latest firmware and the SD card was formatted in the camera. Occasionally when I reset the unit I get a white frame about half-way up the left edge, presumably the rear camera frame, but this disappears and the cam freezes again with the 1 sec recording marker after another second.
Interestingly I decided to try plugging the cable into the main camera without the camera attached to the other end and same thing - the main camera frozen up and stopped at 1 second, so I’m thinking it may be the cable as the main camera works just fine without the rear cable attached.
Has anyone come across this before?
I’ve emailed support but it’s taking quite a long time to get replies and with the holidays fast approaching and the snow….
Many thanks
Brian
I'm having problems connecting a rear window camera (NBDVRS2RWC) to my front 322GW.
Upon plugging in the rear cam nothing happened except the main cam froze, showing the recording indicator stopped at 1 second. The power button didn’t work, nor did the screen or unplugging the cable. The only thing which worked was the reset button, but resetting gave the same results any time the rear camera was connected. Without the rear cam everything was fine.
Had an online chat with support who told me that it was probably my Sandisk SD card (U3 Class 10) and that I needed to use either a Nextbase branded card or Sandisk High Endurance. As the Nextbase wasn’t available I ordered the Sansisk and no change - still freezing with the rear camera connected.
I spent about an hour yesterday evening rebooting, reconnecting etc and am no further on.
The main cam has the latest firmware and the SD card was formatted in the camera. Occasionally when I reset the unit I get a white frame about half-way up the left edge, presumably the rear camera frame, but this disappears and the cam freezes again with the 1 sec recording marker after another second.
Interestingly I decided to try plugging the cable into the main camera without the camera attached to the other end and same thing - the main camera frozen up and stopped at 1 second, so I’m thinking it may be the cable as the main camera works just fine without the rear cable attached.
Has anyone come across this before?
I’ve emailed support but it’s taking quite a long time to get replies and with the holidays fast approaching and the snow….
Many thanks
Brian