HonestReview
Well-Known Member
- Joined
- Feb 9, 2019
- Messages
- 3,557
- Reaction score
- 790
- Country
- Sweden
Okay i have driven some days with the bitrate lowered to high, and that seem the same, so still at times the camera stop recording ( no beeping ) with 2 channels saved 1 second from the Front and Internal cameras, the rear camera do not get saved when the camera stop like that.
I have not been able to find any example of the camera starting to record on its own later on, the cases i have now the camera stop mid drive, and then 20 min or so later i set off from some place where i have been stopped.
I am using still default values aside for +2 for time zone - extreme and for this session high bitrate, and H.265 encode, and of course the Adata A2 memory card.
My 1/2 hour drive on Friday morning, well the drive to the gas station are saved, and about 3 minutes after i set off from there, but the rest of the drive ( 90 % ) are gone, and the next drive is me driving home again Saturday evening around midnight.
Here's a good example. I posted this in the main thread. My camera had "frozen" and dropped the interior camera 7minutes before I entered the car. When I started the car, and camera exited out of parking mode, the interior returned on it's own. From my own testing what I have discovered is that a complete power on / off or a cycle in power can bring the interior camera back to life. It will eventually return (or at least has in some tests) once the unit cools down. I can't say whether this is true on newest firmware. I've pretty much hit the ceiling on what we can do to test the camera.