Recent content by ansi3k

" because it is company policy" Worst company ever....

Thank man, but can you upload the file again? It is not accessible anymore.

You do not need to disassemble the cam. I've dissembled only filter self to paint it black. If silver color of the filters rings is okay for you, you cal let it be. I will make tomorrow a photo of the cam.

Good idea. Thank you!

I've dissembled and painted black GGS Magnetic Polarizer Filter Lens 18mm with adhesive ring for Digital Cameras http://www.ebay.de/itm/GGS-Magnetic-Polarizer-Filter-Lens-18mm-with-adhesive-ring-for-Digital-Cameras-/111441170972?pt=Camera_Filters&hash=item19f269521c It has a bit bigger...

Hi, by default /design it is not connected to the ground... But if you take a mutlimeter and check that forgetting to switch power off, than you will have the ground as I have it now... Forget all that the cam is real brick now :confused: maybe one of resistors is not resistor anymore. Chai...

Thank you for your time! I think the cam can boot from SD Card too, theoretically ;) I've changed cramfsImage and broken /dev/mtd3 according to /usr/local/etc/itr_update.sh from cramfsImage_itronics_FHDBB: nandwrite -p /dev/mtd2 /opt/uImage_itronics_FHDBB nandwrite -p /dev/mtd3...

Theoretically it can be possible to emulate that piece of <censored> with qemu.

No, it is dead. No sound at all and no chance to load any firmware. I've tried to get boot output from console using GPS serial/usb connector over "do it yourself cable" but i see only garbage in terminal. no way with my knowledge. I have no problem to make Linux/FreeBSD/Solaris image to boot...

can somebody post dmesg output from the cam?

Thank you. BTW I've got the brick by moding fimware to use the cron. Something went wrong with compressing of firmware :rolleyes: finally I can by my me SP without any doubts :mad:

I've accidentally put wrong card with 2.2 firmware in to the cam :) Terrible quality I would say. I would not try to downgrade the cam firmware. It is too risky I think. I see crontab in the new firmware "soft linked" to busybox under cramfs (If we can call that as linking in the FAT). Here are...

I've extracted the your moded firmware. Your script looks excellent, but I cat find crontab in itb100_fw. Is it in uImage_itronics_FHDBB? I can't extract kernel image :(

First of all thank you for your time. It is not full, 202.768.384 byts are free now. Power cycle the cam doesn't helps. Error beeps are still here after reboot. The timestamps are okay. I have the files on the card with the same names: inderx.txt > 20140125_195412 rec_20140125_195412.avi...

Removing files from the sd card doesn't works. The Card has an index.txt file with entries like 20140125_195212 20140125_195312 20140125_195412 20140125_195512 20140125_195612 but becomes full. All what you have are errors beeps like ones you have with damaged card. It is 440 files (ca 70mb...