Config PowerMagic Pro with DR600GW

TraxxMaxx

New Member
Joined
Mar 31, 2015
Messages
16
Reaction score
5
Country
Belgium
Dash Cam
BackVue DR-600GW
Hi,

My DashCam is BlackVue DR600GW

What is yours settings for your PowerMagic Pro ?

I have a Range Rover Evoque and after 3 nights and 2 days, my car informs me that the battery is low.

My settings are : 12V and infinitie

What'is the best settings for powermagic pro ?

Thanks
 
do you need it running all the time?

if your car is telling you the battery is low then your power magic pro voltage is set too low
 
do you need it running all the time?

if your car is telling you the battery is low then your power magic pro voltage is set too low

What is the recommand voltage (22,8V) ? the voltage of the battery is 12V

The camera record all the time because there is a lot of traffic in my street :-( and I don't know what is the best settings
 
the battery is nominally rated at 12v, when your car is running it will be around 14.5v, at key off will probably settle around 12.5v and gradually drop from there

below 12v you'll have trouble starting in colder weather
 
the battery is nominally rated at 12v, when your car is running it will be around 14.5v, at key off will probably settle around 12.5v and gradually drop from there

below 12v you'll have trouble starting in colder weather

Thanks for your response :)

But the settings of PMP for the voltage is 11,8V, 12V, 22,8V, 23,2V

The best settings are 12V with a timer ?
 

Attachments

  • mb_0_325_l__ms1.jpg
    mb_0_325_l__ms1.jpg
    62 KB · Views: 6
12v (it's not deadly accurate, it's + or - 0.1v) with the timer option is probably a better idea
 
12v (it's not deadly accurate, it's + or - 0.1v) with the timer option is probably a better idea

Yes I set up 12V and the timer 24h.

Thank you so much for your help
 
Back
Top