K1S Dual Dash Cam on Can Am Spyder

G

Grumpy

New Member
Joined
Aug 15, 2015
Messages
25
Reaction score
4
Country
United States
just installed the K1S on my Spyder and since I don't ride much in the rain I am not to concerned about moisture. The DVR, GPS and remote control button are protected in a compartment and the front camera is behind the windshield. I have sealed both cameras microphones with clear tape however I will be looking for an enclosure for the rear camera.
 
Grumpy said:
just installed the K1S on my Spyder and since I don't ride much in the rain I am not to concerned about moisture. The DVR, GPS and remote control button are protected in a compartment and the front camera is behind the windshield. I have sealed both cameras microphones with clear tape however I will be looking for an enclosure for the rear camera.
Click to expand...

@RockThinking has a new special edition of this for motorcycles.
http://www.innovv.com/#!the-k1/c3r6
 
Interesting read. How do the cameras for Motorcycle attach? If the existing units go bad due to moisture, I know now where to get good replacements.

thanks
 
Last edited:
It has a different lens case design, the solid aluminum, that has three screw holes on lens case.

and there is rubble ring to hold lens to for lens case water resistant.
 
A cool video, that is very nice.
 
RockThinking said:
It has a different lens case design, the solid aluminum, that has three screw holes on lens case.

and there is rubble ring to hold lens to for lens case water resistant.
Click to expand...

Three screw holes? So is there no universal-standard camera mount hole on the lens case, or are all three holes the universal camera mount type, allowing mounting in different orientations? Is the lens case compatible w/ the RAM Ball mount for cameras? (https://www.rammount.com/part/RAP-B-366U)

Considering the purchase of one of these and trying to figure out the best way to mount it.

Thanks.
 
SocalMotoCommuter said:
Three screw holes? So is there no universal-standard camera mount hole on the lens case, or are all three holes the universal camera mount type, allowing mounting in different orientations? Is the lens case compatible w/ the RAM Ball mount for cameras? (https://www.rammount.com/part/RAP-B-366U)

Considering the purchase of one of these and trying to figure out the best way to mount it.

Thanks.
Click to expand...


You can see the photo, the lens on ram mount,

All three holes are made for mount,

INNOVV K1-INSTALLATION-03.jpg

Lens on Ram Mount.jpg

Lens mount 1.jpg
 
Interesting, definitely an option
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
BlueRubber Which dual 1080p motorbike dash camera? Motorcycle Cameras 18
D Where are the 4k dual motorcycle dashcams? Motorcycle Cameras 15
melensdad Looking for Dual Cam for motorcycles Motorcycle Cameras 109
D Dual chanel cam with parking Motorcycle Cameras 8
teddyc1 MotoProCam dual 1080p Motorcycle Cameras 6
Similar threads
Which dual 1080p motorbike dash camera?
Where are the 4k dual motorcycle dashcams?
Looking for Dual Cam for motorcycles
Dual chanel cam with parking
MotoProCam dual 1080p
Back
Top