PMP off position can't turn on dashcam

Polapat Bhiromkaew

New Member
Joined
Jan 14, 2015
Messages
12
Reaction score
1
Country
Thailand
Hi everyone,
Today I installed my DR650 2 channels with power magic pro. My problem is when i put my PMP to off position, my dashcam is always turn off even i started my car and engine is running. I am not sure if i installed incorrectly or not. Could you please help me with this issue? Thanks Paul
 
Last edited:
Duplicate from your question in other forum
I would suspect the source of power for your "on with key" . The PMP needs power from 2 sources.. one always on (I used the brake power) and something that is only powered while the key is in the on position (I used the radio.. but lots use the cigarette lighter source).
If.. you selected the right sources... perhaps.. you have the wires from the PMP mixed up.
 
If you connect the yellow (hot) to the brake and the red (ACC) to the radio/cig lighter, then the switch on the Power Magic Pro should work perfectly. Just be sure to use a test light to verify which fuses are actually hot and ACC.
 
Back
Top