Some pictures about the installation

BRex

Member
Joined
Feb 27, 2016
Messages
59
Reaction score
9
Country
Hungary
Dash Cam
Mini 903; Mini 906
The cable holder clips have very bad stickers, so I have changed them for the much stronger onesDSC02087_1.jpg DSC02088_1.jpg DSC02089_1.jpg DSC02090_1.jpg DSC02091_1.jpg DSC02092_1.jpg DSC02095_1.jpg DSC02096_1.jpg DSC02098_1.jpg DSC02099_1.jpg DSC02087_1.jpg
 
- Maybe the cables end part (to rear camera) is better to ended with flexible part, so it is not needed to put under the cars tail trim panel.
- It would be nice that the rear camera has a separate power connection also (as an option), so I could power up the DashCam system from the rear cigarette lighter plug too
 

Attachments

  • sku_203601_1.jpg
    sku_203601_1.jpg
    23.5 KB · Views: 8
Rear_2017-05-23_20-32-29.jpg

I had to remove the rear camera from that black cover, because the Sunlight heat melt down the heat resistant double sided tape (!). I have to put in the glass, under that black cover. The view angle not so good now. The outside temperature is under 19C and rainy, so I could not test it out against the temperature.
The high temperature can influence the quality of the footage maybe (lens focus?)
 
Last edited:
The front camera mounting is stable. It needs more flexibility (E.G. rotation in 360 degrees and possibility to mount on the left side without any fuzziness)
 
Back
Top