Mineshaft
Active Member
- Joined
- Aug 13, 2014
- Messages
- 281
- Reaction score
- 167
- Location
- Carleton Place ON
- Country
- Canada
- Dash Cam
- Viofo A119 V3 c/w GPS/CPL
In the A119S Quick Start Guide there is a conflict with the G Sensor setting.
Page 6 states - It is recommended to keep the G-sensor set at “Medium” (default setting)
Page 14 states – The G-sensor measures g-shock forces. The setting from “Low” to “High”
determines the amount of force needed to lock the file from being overwritten by loop-recording.
We recommend leaving it set at “Low”.
I’ve set my G-Sensor at “Medium” and it works just fine.
I’ll use the option of Low or High if required
Page 6 states - It is recommended to keep the G-sensor set at “Medium” (default setting)
Page 14 states – The G-sensor measures g-shock forces. The setting from “Low” to “High”
determines the amount of force needed to lock the file from being overwritten by loop-recording.
We recommend leaving it set at “Low”.
I’ve set my G-Sensor at “Medium” and it works just fine.
I’ll use the option of Low or High if required