Wrong Firmware installed, how to recover?

[Hiroshi NAGAKURA]

I'm using Street Storm CVR-A7810-G PRO.
I tried to update firmware using SSA7810GPRO.160519.V7.2.
After installation, DVR never start only red LED turned on.
May be I made a mistake to apply 7.2x firm.

How can I recover this and install correct firmware ?

I'm waiting for kind advise.

 

[kamkar]

Konichiwa Hiroshi, welcome to the forum.

I am no expert on this so i cant help you, but i am sure some of the other guys can come up with something.

A guess of mine would be you need a .elf file to unbrick the camera before trying to load a new .bin file.

 

[SawMaster]

Welcome to DCT
You should contact the seller or manufacturer directly for instructions on how to proceed from here. They may be only source for the correct firmware.

There is always some risk in changing or updating firmware so my advice is that if a cam is doing what you want it to do, it's best to leave it alone

Phil

 

[Deleted member 46308]

Welcome to DCT @Hiroshi NAGAKURA

 

[Module 79L]

I'm using Street Storm CVR-A7810-G PRO.
I tried to update firmware using SSA7810GPRO.160519.V7.2.
After installation, DVR never start only red LED turned on.
May be I made a mistake to apply 7.2x firm.

How can I recover this and install correct firmware ?

I'm waiting for kind advise.

Did you remove the card from the camera after installing the firmware?

 

[naga]

Thank you for some advise.

Actually I could recover by myself refer to the following page.
https://3ppc.net/forum/showthread.php?p=552202

I used Google translation into English, then I could understand
how to recover.

Thanks,