- Joined
- Aug 11, 2015
- Messages
- 1,867
- Reaction score
- 485
- Country
- China
1. After the connection to HDMI, the touch can not operate, so can not enter the playback problem
2. After connecting HDMI shutdown, turn off the LOGO display anti-90 degrees
3. increase the touch wizard, restore the default or upgrade after the first boot, there will be a touch wizard interface, guide the user to know what the main interface gestures and what operations
4. Added function: to restore the default settings, return to normal video mode, and prompted to touch the wizard
5. Solution to open the FPV, even connected to HDMI, will lead to crash problems, because HDMI and TV can not output at the same time can only output a video stream
6. Increased ISO 3200 manual control
7. to solve the closure of the cycle of video, the video to the card after the card full of tips have not disappeared, can not operate the TP problem
8. Optimize the function can not be effective at the same time, the menu to increase the gray background, such as open the gyroscope, FOV and fish eye correction menu becomes gray, then click on the button can not enter the secondary menu or button OK button can not enter the secondary menu
9. In the menu under the two menu, press the power button down options, this time if the slide TP, press the power button down, there will be a disorder problem
10. Set the camera to set the camera mode, the photo set to 12M, and then shut down; and then boot, and then open the wifi, mobile phone camera wifi, camera crash
11. Under the Optimize menu, click into the secondary menu and the response speed returned after the second menu selection
12. Optimize left and right sliding switch mode speed and camera busy tips too frequently to solve the problem, after optimization, sliding switching mode should be faster than before 2 to 3 times
13. solve the problem: in the camera mode, select the watermark off, take pictures out of the picture will still have watermark information
Editing this changelog now.... changelog and firmware will be ready shortly
2. After connecting HDMI shutdown, turn off the LOGO display anti-90 degrees
3. increase the touch wizard, restore the default or upgrade after the first boot, there will be a touch wizard interface, guide the user to know what the main interface gestures and what operations
4. Added function: to restore the default settings, return to normal video mode, and prompted to touch the wizard
5. Solution to open the FPV, even connected to HDMI, will lead to crash problems, because HDMI and TV can not output at the same time can only output a video stream
6. Increased ISO 3200 manual control
7. to solve the closure of the cycle of video, the video to the card after the card full of tips have not disappeared, can not operate the TP problem
8. Optimize the function can not be effective at the same time, the menu to increase the gray background, such as open the gyroscope, FOV and fish eye correction menu becomes gray, then click on the button can not enter the secondary menu or button OK button can not enter the secondary menu
9. In the menu under the two menu, press the power button down options, this time if the slide TP, press the power button down, there will be a disorder problem
10. Set the camera to set the camera mode, the photo set to 12M, and then shut down; and then boot, and then open the wifi, mobile phone camera wifi, camera crash
11. Under the Optimize menu, click into the secondary menu and the response speed returned after the second menu selection
12. Optimize left and right sliding switch mode speed and camera busy tips too frequently to solve the problem, after optimization, sliding switching mode should be faster than before 2 to 3 times
13. solve the problem: in the camera mode, select the watermark off, take pictures out of the picture will still have watermark information
Editing this changelog now.... changelog and firmware will be ready shortly