Noise problem with hard wire kit HK3

Another video with this frustrating fault... :drowning:


It is probably the front camera unit itself.
checked it with another different set that i have
my set up >> my cam = problem occurs
my set up >> different cam = no problem
second set up >> my cam = problem occurs
second set up >> different cam = no problem
Any suggestions how to fix it? what will happen if i use the GPS for power instead of camera side with HK3?
@viofo can you please advice. i bought it less than 4 months ago...
If so inclined, open up the camera and see where the mic is. Sometimes the mic is taped to one of the capacitors. If it is, move it and see if that helps.
 
If so inclined, open up the camera and see where the mic is. Sometimes the mic is taped to one of the capacitors. If it is, move it and see if that helps.

If it is, it should be a constant problem not only with HK3 right...?
will try though
 
Got the HK3 hard wire & assembled it today in lab to do some tests.
noticed that there is a constant "wheezing" noise in all the videos...
I repeated to verify & unfortunately i was not wrong. with the standard wire the noise is gone.
i think it might be a shielding problem or other electrical phenomenon :confused:
anyone else familiar with that?
It may also matter which circuit you tied the kit into, in the vehicle

Sent from my SM-G955U using Tapatalk
 
Back
Top