Buttons stuck? No action in the button press. [update: likely caused from hot battery expanding]

I suppose you need it;), if now connected to car and recording, that's good enough.
 
It doesn't matter cuz the lens disconnects from the board. Remove 2 screws in front and 2 in the back and wiggle, it will come apart. Back I cannot guarantee you'll be able to put it back together.

ROCK
If you don't mind please send the battery, thanks :)
 
I don't know to to take it apart since the C2 lens is glued in.

Follow the instruction from thebotan.
  1. Apply alcohol to lens thread for a while and take off the glue.
  2. Take out 4 screws from front and back,
  3. Take out plate from back, and take out the batter then.
  4. Put the button side down.
  5. Take out plate with lens from front.
Take the battery from PCB board, and take out the lens board, keep it for a while.
Put them back, and power them on to see what happen.

I am thinking that the lens may damage, and could not be repaired by that way.
Whatever, just try.
 
It doesn't matter cuz the lens disconnects from the board. Remove 2 screws in front and 2 in the back and wiggle, it will come apart. Back I cannot guarantee you'll be able to put it back together.

ROCK
If you don't mind please send the battery, thanks :)

Just message me your address, I try to send you one.
 
Back
Top