Search results

  1. Vince33

    A119 V3 GPS mount

    I already have a A119s with GPS mount. Will that GPS mount work on the A119v3?
  2. Vince33

    Well I finally did it!

    Question. Do you know if the V3 can be mounted on the GPS mount of the V2 version? That would save me a GPS mount and possible rewiring.
  3. Vince33

    How to prevent small shaking?

    Oh they are for that purpose??? :) I thought they were the adhesives for the 2 other clips (to mount the cam without a GPS module). That's why I didn't look at those anymore and left them in the box. Ok I'll look into sticking that in between the GPS and dashcam then! Thanks. PS I see I need...
  4. Vince33

    How to prevent small shaking?

    So I installed my new A119S in my car. It's installed together with the GPS mount, so the mount is actually attached to the windscreen. I notice that above certain speeds (at least above 100km/h) you see very light shaking in the video. I also know this because I compared it with my previous...
  5. Vince33

    Suction mount for A119S

    Does anyone know about a suction mount that I could use for the A119S? I might want to install it briefly in another car and don't want to send the fixed mounts for that.
  6. Vince33

    A119S V2 startup time

    I see my topic is used for other topics as well, that's ok :) and so I will also ask another question (BTW I ordered the A119S from amazon.de yesterday!): Which brand/type SD card works best with the A119S? Would this be ok...
  7. Vince33

    Opia 2 sometimes doesn't automatically start recording when powered on

    Good point :). Do you perhaps have the answer to this question? https://dashcamtalk.com/forum/threads/a119s-v2-startup-time.30824/
  8. Vince33

    A119S V2 startup time

    It's very important for me that a dashcam starts recording as fast as possible when I start my car. I know about dashcams (read somewhere that the A119 does that) that can take like 10 seconds or more before they actually start recording. Well within 10seconds I'm already at the end of the...
  9. Vince33

    Opia 2 sometimes doesn't automatically start recording when powered on

    hmmm but about the A119 I also read that it's not always fully reliable.....
  10. Vince33

    Is Vico-Power Plus mandatory for Opia2?

    Until now I've connected all the dash cams I had directly on the car wires (near the fusebox) but I'm not 100% if that will work with the Opia2. Can someone tell me please? BTW I'm not going to use parking mode.
  11. Vince33

    Opia 2 sometimes doesn't automatically start recording when powered on

    Did any of you find a solution for this? I'm about to purchase an Opia2 but if it's not reliable enough I'll find something else.
  12. Vince33

    Viofo A119S V2 or Street Guardian V3?

    Did you get an answer on this?
  13. Vince33

    Question about power and night quality

    Hi guys, I currently have an ITB-100 in the back and the Panorama II/S in the front. Now my questions about the SG9665GC are: - As I already put away nicely the powercable for the Panorama, can I easily replace the Panorama plug by and solding a micro-usb connector instead to the same wire and...
  14. Vince33

    VOTE !!! - for FULL MATTE BLACK Panorama S with NO LOGOS at the front !

    I vote YES, get rid of it. I hate the shiny look and logo's!!!!! At the moment i just marked it with a black stift. But it wears off and starts to look ugly.
  15. Vince33

    Panorama 2 GPS Mounting Location?

    I asked both sungmoon as niko for possibility of recording the GPS data (and speed), but not showing the speed in the image. they said it's not possible, see also this post http://dashcamtalk.com/forum/posts/59212/ but is Roadcam now saying it might become available soon!? that would be awesome!
  16. Vince33

    Where did you mount the camera? Post your pictures

    I suggest you paint the rearview mirror black, I did that as well! In my previous car, but also in my current car. regarding placement, just make sure the cam sees enough. and better place it highest as possible and tilt down (to prevent incorrect auto brightness due to the sky).
  17. Vince33

    Interested in PanoramaII

    anyone want to comment on my opinion? also i have another question: which settings i Cyberlink Powerdirector 11 should I use when I want to upload it to Youtube? I don;'t want to upload directly from director to youtube, so first to a local file. But which settings are best?
  18. Vince33

    Interested in PanoramaII

    Hoi Bitterbal (ik ben ook Nederlands :)), Regarding the suction mount, i ordered this: and that comes with a free gift suction mount (scroll all the way down to "Components"). This suction mount is very good! Regarding the CPL filter I don't know which one is best (look around a little bit...
  19. Vince33

    Reading License Plates at Night, Light Reflection / "overexposure". HID / Xenon, standard bulbs

    That sounds interesting! Will this be a firmware upgrade available for current Panorama owners? Or will it only be part of a new model?
  20. Vince33

    Interested in PanoramaII

    Received my: Panorama II S last Wednesday and looks good! I'm not using a CPL filter because I don't want to take it off every evening. What I really do not understand though is that the material of the device is reflective/shiny black! A dashcam must be as unnoticeable as possible to prevent...
Back
Top