Search results

be very carefull the symptoms you are seeing is the start of the battery dieing. As said above it should charge when in use in the car. If it was me I would want a replacement John

The answer to 3 is that the internal battery has had it (send it back)

Could it be your cell phone? see if making a call adds the audio issue, the output from these divices can cause all sorts of strange things to happen if the other device is not correctly shielded, especialy if in poor John

As you had the power connected to the GPS mount it would still be working so as soon as you power on the 0806 with the button you will get a lock as the GPS mount already has "lock" however as soon as you take the power off the GPS mount will reset and have to get lock again. John

try a short record just on battery to isolate if it is on the power line or RFI John

My bad forgot to add link https://dashcamtalk.com/forum/threa...ars-head-unit-update.11495/page-2#post-151612 John

have a look at this thred which shows all of what you want to do John

I think that "log" just adds the info to the file used by the viewer and "on" adds the info to the video as well John

Maybe this is the only unit in the world with parking guard and dual card working ;)

have a look at this thred https://dashcamtalk.com/forum/threads/view-0806-on-the-cars-head-unit-update.11495/page-2#post-151612 John

Dashcam Viewer cannot play the full res that the 0806 creates you have to lower the res a bit for it to work, it will be a great product once it can handle the full res :) John

I made a cable up for "mollydog" so he could connect the 0806 to his in car head unit this showed the live feed up if you wanted it, I am not sure if you triggered playback on the 0806 it would also show via the cable but I would think it did. With this setup you could use any device that could...

Great, looks good. I was getting worried that I had not made the cable correctly :eek: Glad that it is all working OK :) John

Have you tried it without the USB adapter you are using as pin 4 is not a normally used pin and it may not be connected through. Only thing I can think of. You will not be able to use the rear view input without triggering in on the head unit, often a pink wire. John

I had two that did exactly the same, I wonder if it is something to do with the battery going so flat the it will not work any more? Mine went back and am now just waiting to see if I go for one of the newer V3 ones or even V4 when they start I think this is a great camera but still has some...

Yes it would prevent it but it would be recording all the time. Unfortunately it looks like you have a faulty camera battery, so will need to be returned for a good unit unless you want to try to get a replacement and change it yourself. John

I would happily have soldered this for you but looking at the micro USB picture you appear to be missing the lug for pin 4 which happens to be the one you want John

This is caused by the battery going flat overnight, as a test put the ignition on (do not start car) wait a second or two. turn ignition off, then on again if the camera then starts it is the battery. The reason is the reason is that as the battery is dead it does not see the power comming on as...

do not quote me on his but, I think the video out is on pin 4 in the micro USB so if you wanted you could make up a custom cable that would power the 0806 and extract the video out off to another cable. I also seem to remember that you have to enable it in the settings on the 0806 and that it...

Or was it a shutdown chime because the power was cut?