Search results

Does Sandisk work on F750 2ch ? I have two Sandisk 32Gb extreme

I turned all the led off so as not to alert people if they happen to knock my car thinking that it might be off. So that they might run away thinking they are safe or not breaking my wind screen to take away the camera..

Yes I know what you mean because of the motion detection it will trigger the most recording,so I might need to set the motion detection to its lowest point or off it...might give it a try

Mine record every minute as what I have set... is is because of the g sensor I set to 100% as part if the reason?

If you use a camera with parking mode it wont run continuously. It will only record when there is movement or a bump which will start it up Therefore you wont need 9 hours. Also what are you going to do if they hit the side or rear and the camera is looking out the front. You need an external...

If you use a camera with parking mode it wont run continuously. It will only record when there is movement or a bump which will start it up Therefore you wont need 9 hours. Also what are you going to do if they hit the side or rear and the camera is looking out the front. You need an external...

What would be the recommended setting for the motion detection setting? And For parking g sensor I put 100% for all the 3 direction is it too much? Other than scratches on the side by mischievous person the most likely to happen for us in our country is coming from the front where some blur...

For me I need at least a 9 to 10hrs of clear video on the week days night time, that's the amount of times in the carpark which some vehicle might knock into my car and run away, I encountered this before which in spend almost usd300 + to patch it up. I want the highest resolution therefore I...

yes , it can't be format on the DVR but if im using on the stock 1.008 FW when i format the sd card what will be the custer size ,also 32kb ?

Hi guys, after reading thru the thread I'm interested to upgrade to 64G scandisk , my question is I'll be using the stock 1.008 FW English version (not the custom) 1) I still need to format using the guiformat software ? 2) The cluster size I need to set it as ?

just installed the lastest firmware of 1.008 English ,the time so far so good...