Search results

Just checked it The bottom of the camera is rattling a bit. I've fixed it with 3 layers of tape between the 2 bottom clips. The tape is attached to the camera.

Thanks. I will place some adhesive tape between mount and camera, as I did on the A118

Are those pads designed to be placed bewteen mount and camera ? I have no such pads in the box.

I've removed the CPL, I still have a vibration. I suspect the GPS mount connection with the dashcam. Any way to fix it ?

I found a supercap that I have ordered for my G1W and never used. After replacement, the dashcam do not sarts up. Same with old cap. I don't know what I've done wrong but now the dashcam is dead.

This was already tried... I've tried to replace the capacitor, now the dashcam do not startup... it's dead, no problem anymore... :(

Hi all ! I would like to replace the supercap of my. 750S. It's a STARCAP 5.4V 3.5F. I only can find 5.5V 3.5F on Aliexpress. There is no 5.4V. May I use 5.5V instead of 5.4V ? There is also written 65°C on the original capacitor, but I can't find this information on Aliexpress items

Hi all, My 750S has a problem : when I disconnect from power source, I don't have the message "The blackvue will now shutdown". The dashcam is shutting down faster as it should. Is there a tuto to disassemble the 750S ? I can't find it on youtube. Any idea of what to replace ? Battery or...

My 750S has stopped working again after 2 weeks :( I will try to replace battery or capacitors and let you know. When I disconnect the dashcam from power, I dont have the message "The blackvue will now shut down"

Yes I know, but I've never experienced a corrupted 10 min file on my previous dashcams. I hope to have same behaviour on the A129 ;)

Eveything is OK now with a Samsung EVO Plus 128GB

Sony sensors are different. So you can't use rear cam of the 750X with the PLUS. But I think you would prefer not buying the PLUS. Video quality is worse than the old 750X. Why a PLUS version ? Only because or semiconductors shortage. The Sony IMX327 is probably very good for static...

I've always used 10 minutes clips on my Toguard CE20, I've never had any issue. But it is a good advice anyway ;) I prefer 10 minutes clips in order not to lose the action when I press lock file button. If I press the button at the beginning of a new file, I lose the action which has happened...

Yes, I was aware for years that Sandisk was not recommended for chinese dashcams. Probably I have forgot this point :D I've got a Samsung EVO in my stock, I will try this.

I've got the Sandisk Ultra 32 Go. Already planned to replace it with a 128 GO, I will choose a better brand :) Thanks for information :)

Tomecho2, I've got the V2.2 firmware as well, and experienced the same behaviour. There is no recording before the movement detection in AutoEvent mode. I've tried to walk from left to right in front of my car and immediately from right to left, on the video, I can only see the right to left...

I've received mine with firmware 2.2 as well, but with a different build : 20210908 But the firmware release is still 2.1 on website.

Hi all, My firmware is V2.2 , build 20210908. Loop recording is set to 10 min Movement detection is set to OFF. Sometimes, when driving, the file is closed before reaching 10 minutes, and a new file is created. But between these 2 files, there is a gap of 25 seconds missing. Any idea of what...

Thanks for tips. If someone have another idea, I might be interested as well. Of course, my CPL will stay in place at night ;)

The holder loose on the camera. But I dont like Patafix or so because texture is changing with heat and sun.