Search results

What's the best way to check my memory card? It usually records fine but Ive never checked it after it beeps randomly as I didn't realise it was switching between normal mode and parking mode. Also any 128gb memory card you would recommend?

Just updated it. Also just realised dip switch was on the 11.8v setting so now I've swapped it to the 12.4V setting. Pretty sure it's on the 3 wire connection from the cellink neo to the hardwire kit.

Hi guys, So I have my SG966DC hooked up with the hardwire kit to my Cellink Neo in my 2013 Subaru Impreza. I've got a Samsung PRO Endurance Micro SDXC Card 128 GB running in the camera and I'm finding that sometimes after I return to the car and drive, the SG966DC is beeping to indicate it's...

https://www.facebook.com/BlackVueAustralia/posts/832207160287863?comment_id=832209903620922&reply_comment_id=832259473615965&notif_id=1507712021537523&notif_t=feed_comment_reply Looks like an update will come soon to fix this issue after I raised it to the attention of BV Australia

Agreed, how do we put forward this feedback to blackvue so it can be implemented in a firmware update? Sent from my XT1635-02 using Tapatalk

So I noticed that there might be a slight flaw in the parking mode impact detection announcement feature today. Quick recap, the parking mode impact detection announcement is the announcement your camera makes after exiting parking mode if your camera has detected any impact while you are away...

Just did some testing of my own. Rear one seems to be interchangable between 650 and 750. Front one, 650 will go into 750 mount but 750 will not go into 650 for some reason. So ended up just swapping the front one.

Is the DR750S mount the same as the DR650GW? I have the DR650S mounted in my car but just purchased the DR750S. Wondering if I need to remount everything.

Will this camera have a parking mode?

Can report that the Lexar 64gb high endurance microsd card is holding up much better with the DR650-2ch, firmware 2.007 and cell link b battery. My dash cam runs pretty much 24/7 and it hasn't restarted once or stated that I need to check the sd card since swapping over to the high endurance...

so anyone finding this problem with the Lexar 633x 128gb cards? at home and at night the card seems to perform fine. But as soon as I park it under the sun during the day, the card shouts at me "check sd" card until I reboot it when I've returned to the car. After rebooting it will work for...

After this experience, I somewhat agree with that statement but given where I live, where I park and the fact that I don't t have comprehensive insurance, I'm too much of a worry wart to not use parking mode. But such is life. I really appreciate everyone's help though. Also apologies to OP...

Damn, my car needs that specific battery as it's required for the auto start stop system. I think i might just invest in a cellink b battery pack as that way there's no chance my car battery will die on me. I'll keep my current battery and use it till I die (battery still starts if I haven't...

According to this website which should be the battery in my car, cca is 650 amps http://www.centurybatteries.com.au/resources/battery-finder/product/q85 My guess is that because my battery is 3 years old, the PMP has drained the battery to the point where it's below the cca and no amount of...

Damn I was hoping that wasn't the case, my batter is one of those special expensive ones as my car has an auto start stop system so it'll cost over $400 to replace. It was on 12.26v this morning and wouldn't start. PMP was on but had already cut the power to the dash cam overnight at 4...

I'm getting about 4 hours before my kicks in and cuts the power. Resting battery voltage for my car is 12.4 with the PMP on and supplying the dash cam. Is this normal? Or is my batter a dud (it's been in the car for about 3 years and has atleast needed to be jump started 3 times)? I was...

Also my raw footage files seems to be only of 1 minute or less durations? I have the loop setting set to 5 minutes. Is this normal?

Okay so I just got mine, how does one upgrade the firmware? I'm also using a sandisk 16gb microsd card class 4, will this be a problem?

Thank you that was exactly what i was after!

Hi guys, Thinking of purchasing this as my first dash cam to use in Australia and possibly in USA during my July/August trip. One question with the G1W-C model, if the power is cut off once the ignition is off, when you get into a car accident, how does it save the last file? Does the capacitor...