0805 with latest 151201 firmware no speed and no GPS

MiniT

New Member
Joined
Feb 11, 2016
Messages
4
Reaction score
0
Country
Lithuania
Hello,
recently i bought a mini0805 (GPS, one SD card version) with latest firmware. In the properties i have set it to stamp speed and GPS, but camera stamps zeroes on video. GPS coordinates file looks like it is being filled.
Copy-paste from GPS log:
V,260608,054731.000,,,,,,M,-01.84,+09.80,+00.00;
V,260608,054732.000,,,,,,M,-01.84,+10.41,+00.00;
V,260608,054733.000,,,,,,,-01.84,+10.41,+00.00;
V,260608,054734.000,,,,,,M,-01.84,+10.41,-00.61;
V,260608,054735.000,,,,,,M,-01.84,+10.41,+00.00;
V,260608,054736.000,,,,,,M,-01.84,+10.41,+00.00;
V,260608,054737.000,,,,,,M,-01.84,+10.41,+00.00;
V,260608,054738.000,,,,,,M,-01.84,+10.41,+00.00;
V,260608,054739.000,,,,,,M,-01.84,+09.80,+00.00;
V,260608,054740.000,,,,,,M,-01.84,+10.41,+00.00;
V,260608,054741.000,,,,,,M,-01.84,+10.41,+00.00;
V,260608,054742.000,,,,,,M,-01.84,+10.41,+00.00;
V,260608,054743.000,,,,,,M,-01.84,+10.41,+00.00;
V,260608,054744.000,,,,,,,-01.84,+10.41,+00.00;
V,260608,054745.000,,,,,,M,-01.84,+10.41,-00.61;
V,260608,054746.000,,,,,,M,-01.84,+10.41,+00.00;
V,260608,054747.000,,,,,,M,-01.84,+10.41,+00.00;
V,260608,054748.000,,,,,,M,-01.84,+09.80,+00.00;
V,260608,054749.000,,,,,,M,-01.84,+10.41,+00.00;
V,260608,054750.000,,,,,,M,-01.84,+10.41,+00.00;
V,260608,054751.000,,,,,,M,-01.84,+10.41,+00.00;
V,260608,054752.000,,,,,,M,-01.84,+10.41,+00.00;

What can be wrong? Is there a newer firmware than 151201?
Already tried km/h and ms/h settings, speed stamp only, nothing helps.
 

nei-k

New Member
Joined
Feb 1, 2016
Messages
19
Reaction score
7
Country
Romania
Dash Cam
Viofo 119s / Mini 0805 + DIY mounted 24mm CPL filter / 70mai
You have the latest firmware. Try reseting camera to default settings and ensure that power supply is plugged in GPS module, not in main body. Then setup stamp again and give it a try.
Latest trick i'm thinking: set GPS stamp OFF, save and exit menu, then enter again and set ON, save and exit.
 
OP
M

MiniT

New Member
Joined
Feb 11, 2016
Messages
4
Reaction score
0
Country
Lithuania
You have the latest firmware. Try reseting camera to default settings and ensure that power supply is plugged in GPS module, not in main body. Then setup stamp again and give it a try.
Latest trick i'm thinking: set GPS stamp OFF, save and exit menu, then enter again and set ON, save and exit.
Tried defaulting, no help. Power supply is always plugged in GPS module. Re-setuping stamp already tried too. As per GPS log as i understand GPS function is working, but not stamping properly on video.
I will give a try on your latest trick suggestion. Thank you :)
 
OP
M

MiniT

New Member
Joined
Feb 11, 2016
Messages
4
Reaction score
0
Country
Lithuania
nei-k your suggestion did not help. Maybe, should i downgrade it to older firmware? Does anyone else has this problem with latest firmware?
 

nei-k

New Member
Joined
Feb 1, 2016
Messages
19
Reaction score
7
Country
Romania
Dash Cam
Viofo 119s / Mini 0805 + DIY mounted 24mm CPL filter / 70mai
I had this problem after upgrade, but i fixed as advised before. I have previos version saved on my computer, i'll send you the link by PM. Hope this will help...
 

hiksas

New Member
Joined
Mar 3, 2016
Messages
1
Reaction score
0
Country
Lithuania
Hi, I have the same problem with my new 0805 v.151201. Reseting didn't help.
MiniT did downgrading solve the problem?
 
OP
M

MiniT

New Member
Joined
Feb 11, 2016
Messages
4
Reaction score
0
Country
Lithuania
Did not try to downgrade. Now problem is up in the air and not solved. Maybe they will release new firmware...
 
Top