Del
New Member
- Joined
- Aug 21, 2015
- Messages
- 26
- Reaction score
- 3
- Location
- Northfleet. Kent
- Country
- United Kingdom
- Dash Cam
- Mini 0805
My 0806 has been been acting strangely for a while, sometimes there is the quacking duck noise, sometimes it is constantly restarting. I checked the card today and it has been recording fine.
So today, I thought I would upgrade the firmware (I haven't done this since buying it). When I put the card back in the camera, the Upgrade message came up, I selected Yes, and then it showed 'Processing'.
But after that, there was a strange sound for a second, like an old dial-up modem. I unplugged the camera and then it wouldn't properly turn on, just showing a blue and red LED.
I've followed the 'unbricking' instructions http://mini0806.com/1/post/2015/02/recover-bricked-mini-0806-camera.html but the camera is never recognised in Device Manager when I plug it in, and if I click 'Connect' in DirectUSB it says 0 Amba devices found.
Any ideas?
So today, I thought I would upgrade the firmware (I haven't done this since buying it). When I put the card back in the camera, the Upgrade message came up, I selected Yes, and then it showed 'Processing'.
But after that, there was a strange sound for a second, like an old dial-up modem. I unplugged the camera and then it wouldn't properly turn on, just showing a blue and red LED.
I've followed the 'unbricking' instructions http://mini0806.com/1/post/2015/02/recover-bricked-mini-0806-camera.html but the camera is never recognised in Device Manager when I plug it in, and if I click 'Connect' in DirectUSB it says 0 Amba devices found.
Any ideas?