SteveHOU
New Member
I installed Aukey dual dash cams in my 2018 MDX Advance SH-AWD and I am trying to find an always-on circuit to tap. I have a fuse tap kit with 12/5v converter. My first try was the interior light fuse, #30, and driver's power seat, #15, both in driver's side. They both work fine for parking mode with ignition off and driving except for one quirk, the power actually cycles when the engine restarts after idle stop is engaged which causes the cams to restart at a time when you would probably need them most. I ran my wires to access the fuse boxes in the driver's foot well area. Any suggestions? TIA
