A119 capture button mod

Mozzie

Well-Known Member
Joined
Apr 27, 2016
Messages
668
Reaction score
565
Country
Australia
Dash Cam
A119, B1W, A119S, A129+ Duo
Having just done a trip with the A119, I found it awkward locating the capture button as mine is mounted behind the mirror. Going through hours of video to locate the event is also time consuming.

The capture button is the best solution so I made an easy modification to improve this issue. I added a cutout from silicone protection pads. I used a leather punch to cut out the piece. The pads have adhesive backing which can be stuck onto the event capture button. Works great.

20161130_162259.jpg 20161130_170943.jpg 20161130_162651.jpg
 

niko

Well-Known Member
Retailer
Joined
May 1, 2013
Messages
10,646
Reaction score
6,532
Location
Dublin
Country
Ireland
Dash Cam
Street Guardian UK / EU / EEA Distributor
Good DIY solution !
Almost exactly similar I did HERE.
 
OP
Mozzie

Mozzie

Well-Known Member
Joined
Apr 27, 2016
Messages
668
Reaction score
565
Country
Australia
Dash Cam
A119, B1W, A119S, A129+ Duo
It certainly helps a lot when needed. Now I just need to edit and load the video onto here.
 

uxu

New Member
Joined
Aug 20, 2016
Messages
1
Reaction score
0
Country
Netherlands
That's a great idea. I did something similar, and used a small drop of super glue to build up a small bump. You have to be very careful though... that stuff is very runny.
 
Top