A129 Settings...

[GazSuttonUK]

I have hard wired the camera, using the three wire hardwiring kit from Amazon...
Do these settings look ok?
Video Res - 1080P + 1080P
Time lapse Recording - Off
Loop Recording - 3 mins
Motion detection - Off
G - Sensor - Low Sensitivity
Bitrate - Low
Boot Delay - Off
Parking Mode - Off
Parking G - sensor - Medium Sensitivity
GPS - On
Screen Saver - 1 min
Frequency - 50 Hz

App version 2.9.1
Firmware A129:V1.9

Many thanks and Merry Christmas...

 

[turkayguner]

Does G-Sensor work in parking mode? Did you test it after leaving your car lets say 30 mins or one hour later?

 

[TheGhost31]

Hi, I'm a new user of this dashcam
I almost have the same settings like you but just two things.
Firstly, Parking g sensor with high value (but not sure its really working yet)
Secondly, On the road, g sensor to MEDIUM value, no false record with bumps on road for the moment. If you get some records not required, set it to LOW as you did.

Edit: bitrate is on High for better quality to record.

Display: 50hz is good for UK. 60hz is only for North America and some specific countries

Of course, you will have to set the state ON for the parking mode and not OFF as its seems to be with your conf. Otherwise, when you stop your engine, the camera will be cut after 5 seconds

And I don't know if it's important or not but, I connected using the USB port on the camera side, not gps mount

 

[Gooffeyguy]

G - Sensor - Low Sensitivity
Bitrate - Low
Parking Mode - Off
Parking G - sensor - Medium Sensitivity
Frequency - 50 Hz

Try medium sensitivity for G-sensor while driving

Bitrate - high

Parking mode - either auto detect or low bitrate

Parking G-sensor high

Frequency depends on what country you are in and what frequency the AC electricity works at. North America is 60hz


Sent from my SM-G930V using Tapatalk