Mtz
Well-Known Member
- Joined
- Nov 15, 2012
- Messages
- 4,257
- Reaction score
- 2,923
- Location
- Nice place
- Country
- Romania
- Dash Cam
- Viofo A229 Pro TeleQuad
There is an incompatibility between the cable used by you for powering your camera and camera firmware.
The camera firmware expects some pinout from the cable. To make them matching there are two solutions:
- a special USB-C cable like the HK3-C or cigarette lighter charger cable. The manufacturer expects one of these two cables to be used for powering the camera, but not other cables. I consider it is not their fault.
- firmware modification to accept any USB-C pinout.
The camera firmware expects some pinout from the cable. To make them matching there are two solutions:
- a special USB-C cable like the HK3-C or cigarette lighter charger cable. The manufacturer expects one of these two cables to be used for powering the camera, but not other cables. I consider it is not their fault.
- firmware modification to accept any USB-C pinout.
Last edited: