ambsh question

renzo201

New Member
Joined
Jul 1, 2021
Messages
7
Reaction score
3
Location
Texas
Country
United States
I have a no-name camera that I was able to switch into uart over usb to get an ambsh. From amsh I can change the device into mass storage with the command "usbclass msc". I am looking for a way to get the cam back into normal operation instead of uart or mass storage. Even if I reboot the cam it stays in uart mode. Also if anyone knows how to go from ambsh to amboot shell. Like are there flags for the "reboot" command to enter the boot prompt? It seems like I have most of the default ambarella commands. Sorry if this post is on the wrong board, this is my first post.
 
For anyone else wondering, I was able to get it back into its normal operation by running the command "usbclass custom". This is only a temporary change for my cam though, if the battery is pulled it switches back to serial-over-usb.
 
Back
Top