Beeping after parking mode

AceM

Member
Joined
Aug 10, 2018
Messages
39
Reaction score
8
Country
United States
Recently the camera started beeping when i go to the car after its been parked, this is something new that it was not doing before and the led is flashing, when i start the car the beeping stops and the flashing led goes back to solid

I do have the camera installed using the wiring kit
 
I have had this problem in the past (and so have other people)

What firmware are you running? And which parking mode?

This is the thread where it looks like the same problem is discussed:

Have you checked how much parking mode footage it actually saves to the card?
 
Last edited:
Recently the camera started beeping when i go to the car after its been parked, this is something new that it was not doing before and the led is flashing, when i start the car the beeping stops and the flashing led goes back to solid

I do have the camera installed using the wiring kit
It happened to me 1-2 times during the last month.
I have FW 1.9 and set boot delay to 10s (Hybrid car).
 
I tested the car with a multimeter and noticed it fluctuates between 12.3 and 12.4, and my wiring kit is set to the latter, if its dropping below that is that when it stops recording and starts beeping? I thought the camera would turn off as well?

I am on the latest firmware but using the custom version, and the parking mode is low bitrate
 
Back
Top