When I apply power to my C3 I get a stable orange light for a few seconds, then a stable red light. It won't start recording automatically, nor will it start recording if I hit the record button.
The sd card is a class6 Samsung 32Gb, and I formatted it in the camera by holding down power and shutter at the same time until it blinked green.
Any ideas?
EDIT (SOLVED):
I have my answer. The camera cable has a loose connection about 4" away from the HDMI connector. I connected the output to the AV on my TV and kept getting the "No Image" message - then if I hold the cable in a certain way the image appears, but if I wiggle the cable about 4" from the HDMI connecter then the image stutters and then goes away. When the image goes away the camera crashes, needing the reset.
The replacement camera ("Lens") fixed the problem.
The sd card is a class6 Samsung 32Gb, and I formatted it in the camera by holding down power and shutter at the same time until it blinked green.
Any ideas?
EDIT (SOLVED):
I have my answer. The camera cable has a loose connection about 4" away from the HDMI connector. I connected the output to the AV on my TV and kept getting the "No Image" message - then if I hold the cable in a certain way the image appears, but if I wiggle the cable about 4" from the HDMI connecter then the image stutters and then goes away. When the image goes away the camera crashes, needing the reset.
The replacement camera ("Lens") fixed the problem.
Last edited: