Can I use a Mini0906 3HWK

R1KSU

Active Member
Joined
Aug 29, 2018
Messages
213
Reaction score
66
Location
Thornton, Cleveleys. UK
Country
United Kingdom
Dash Cam
Zerogogo R2. Zerogogo RW100. Mini0906. Viofo A129
Hsolver said:


"i.e. ACC Wire status:
0v = Park mode,
5v = Normal mode?
For mini0906 - in reverse (5v = Park mode). "

So, I have a brand new 3HWK for a mini0906 if i wired my A129 up but used the acc to perm live and live to ign live, would that work ? I have the adapter for mini usb
 
It will work :),
but in reversed manner - park rec_mode while driving and normal rec_mode while engine stopped.
 
As I said if i reverse the cables around, it will work as normal?
if i wired my A129 up but used the acc to perm live and live to ign live, would that work ?
 
Good point, damn.
Need to figure out which fuse tap to get from Viofo then, as their's don't have the same tags as UK models.
 
ACC_OUT (with park signal) wire in mini HWK doesn'n have powerful key transistor (only chip), so it can not be able to work as power supply, it'l be destroyed with a smoke.
If you'd like to use your mini HWK as cut-off device, you can "substitute" reversed park signal from mini HWK (see below the scheme):
ParkSch1.jpg
1) get input ACC wire from fuse,
2) pass it thru any 12-5v adapter,
3) connect it to output ACC wire (it should be cutted off from HWK).
 
Last edited:
Back
Top