jsan said:
kwaijhie said:
So when 1.1.1aE is installed, after it "installs" it reboots you hear that nice beautiful chime and the unit shuts down - no lights, no wifi, no nothing, basically the unit is a brick, it cannot turn on to get into recording mode (unless i revert back to 1.0.5es, then in that case see below).
When i revert back to 1.0.5es everything is fine except for no lights on the unit while it is recording (records fine, but no GPS light to indicate the unit is on and running fine).
When did you receive your firmware from Mio? The original firmware didn't have voices and GPS. Get the latest firmware from Mio
If you do have the latest firmware then after the update is done. Take the card out and delete everything in the system folder and reinsert the card into the dashcam and power it on, see if that makes a difference.
OK so that is something that I have not done, which is delete
only the system folder once the update is done. Now the question I would have is whyjust the system folder and not the entire sd card. The issue that I see is that after the update is 'apparently' done, it shuts down and reload and then stops at the new chime and then everything goes to black (i.e. no lights and no indication of being alive). Not to poo poo your idea (as i am all ears), why only delete the system folder?
Let me know your thoughts, i would love to get to the bottom of all this.