Cutoff Voltage Question

dan.dan

New Member
Joined
May 17, 2019
Messages
3
Reaction score
0
Location
Ontario
Country
Canada
I was told that if the Batteries Voltage right after the ignition is lower than the Configured CutOff Voltage, the Voltage Cut Off will not work.

For example, assume I set the configured cutoff voltage to be 12.3V. If the car battery voltage right after I turn off the car is 12.2V, the dash cam (parking mode) will remain ON and keep draining the power from the battery. I see this behavior in my F800 Pro dash cam.

Has other people encountered this issue too?
 
Shouldn't do that. Can you try a lower cutoff, such as 11.8V and see if that works?

Voltage detection may not be 100% accurate so the 0.1V difference for you may not be being sensed by the dash cam.
 
Back
Top