DCPRO with wrong firmware won't recognise SGP663DC.bin (v1.16)

Steve_Parry

Member
Joined
Oct 1, 2016
Messages
82
Reaction score
24
Location
Brisbane North West
Country
Australia
Dash Cam
Many over 10 years. Currently 1 x SG9663DCPRO, 1 x SG9663DR
Hi guys,
Just trying to update my DCPRO to v1.16 (the latest) and it doesn't want to recognise the SGP663DC.bin file.

On checking the current firmware it has SG20181026_V1.35 which I think is DC firmware? The serial number is DCPRO-2018430249 so I'm pretty sure its the DCPRO.

Any suggestions?

Thanks!
Cheers
...Steve
 
The SG9663DC and SG9663DCPRO is the same hardware. The only main difference is DC uses the IMX323 rear camera and newer DCPRO uses the newer IMX291 rear camera. Your firmware is DC so you should update to latest DC firmware not DCPRO. It’s possible your camera was replaced at some point or other situation.
 
The SG9663DC and SG9663DCPRO is the same hardware. The only main difference is DC uses the IMX323 rear camera and newer DCPRO uses the newer IMX291 rear camera. Your firmware is DC so you should update to latest DC firmware not DCPRO. It’s possible your camera was replaced at some point or other situation.
OK - thank you - I'll do that:)
Cheers
...Steve
 
Back
Top