- Joined
- May 1, 2013
- Messages
- 10,668
- Reaction score
- 6,561
- Location
- Dublin
- Country
- Ireland
- Dash Cam
- Street Guardian UK / EU / EEA Distributor
Recently playing around with different Firmware versions for 0801 I "finally" I bricked it ... YESSS, you did it niko ... "you are the man", LOL
Anyway, thats not the end of the world, I decided to unbrick it. First step is to do a "Direct USB Cable" where pin 4 and pin 5 has to be connected. There are different ways to do that, some are more complicated, some are simple. I have borrowed idea from @cem_ari, - he had easy solution ( HERE )
I did very little changes and more high-res pictures for those who are also unlucky ones with bricked device.
First I did easy-way ...
but then realized that I can not push in mini-usb all the way into the Mini 0801 ( I did not had files to file down soldering point ) ...
... so, I made some small changes, cut more plastic from Pin 4 & 5.
Soldered pin 4 & 5 together
Anyway, thats not the end of the world, I decided to unbrick it. First step is to do a "Direct USB Cable" where pin 4 and pin 5 has to be connected. There are different ways to do that, some are more complicated, some are simple. I have borrowed idea from @cem_ari, - he had easy solution ( HERE )
I did very little changes and more high-res pictures for those who are also unlucky ones with bricked device.
First I did easy-way ...
but then realized that I can not push in mini-usb all the way into the Mini 0801 ( I did not had files to file down soldering point ) ...
... so, I made some small changes, cut more plastic from Pin 4 & 5.
Soldered pin 4 & 5 together
Last edited by a moderator: