neoncek
New Member
- Joined
- Oct 31, 2014
- Messages
- 12
- Reaction score
- 0
- Country
- Slovakia
Hi guys,
I have got Blackvue DR, actually I am lost, I have no idea how to start my camera.
Everything was ok untill yesterday, I stopped at the petrol station and once I moved, camera repeated some some non-english sound. I guess russian. Several times I removed power cord to restart, no success.
At home I removed card, used SDformat tool, made surface scan and copied them fresh-downloaded firmware v2.002. Same software version was on SD card before.
All LED blinked once, then GPS (blue) LED s ON for 6 seconds,
then Security LED (in front) & REC LED (in red) & WiFi LED blinked once,
REC LED (in green) keep ON for 11 seconds.
During this time there is no recording detected on microSD card.
I have tested 2 microSD cards fresh formated to FAT32:
- 16GB MicroSDHC from Pittasoft
- 64GB MicroSDXC Kingston
Car voltage checked, it gives me 11,89V DC, at home I use 12V/1,5A and 12V/300mA power supplies.
Can you please give me some hints how to de-brick my camera or guide me how to diagnose it deeper?
Many thanks in advance.
I have got Blackvue DR, actually I am lost, I have no idea how to start my camera.
Everything was ok untill yesterday, I stopped at the petrol station and once I moved, camera repeated some some non-english sound. I guess russian. Several times I removed power cord to restart, no success.
At home I removed card, used SDformat tool, made surface scan and copied them fresh-downloaded firmware v2.002. Same software version was on SD card before.
All LED blinked once, then GPS (blue) LED s ON for 6 seconds,
then Security LED (in front) & REC LED (in red) & WiFi LED blinked once,
REC LED (in green) keep ON for 11 seconds.
During this time there is no recording detected on microSD card.
I have tested 2 microSD cards fresh formated to FAT32:
- 16GB MicroSDHC from Pittasoft
- 64GB MicroSDXC Kingston
Car voltage checked, it gives me 11,89V DC, at home I use 12V/1,5A and 12V/300mA power supplies.
Can you please give me some hints how to de-brick my camera or guide me how to diagnose it deeper?
Many thanks in advance.