EchoMaster ODB II power cable

terk

New Member
Joined
Jun 5, 2019
Messages
13
Reaction score
0
Location
USA
Country
United States
Is anyone using this cable yet for Parking Mode on the F800 Pro? Seems like the easiest way to go if it is working well.

Thanks.
 
Working on our end as well!
 
From the website:
Disclaimer:

With the EchoMaster OBD II Power Cable, the dash cam may take up to three minutes to switch from Continuous recording mode to Parking recording mode. This transition time between the two recording modes may vary according to vehicle make and model.

So does that mean that 3 minutes it will not be recording anything?
 
I gave up on waiting for the ODB-II power cable, but by the way the hardwire cable works (conitinues to record continuous for about 30 seconds after turning off the ignition then switches to parking mode) I'd guess the ODB-II cable would work the same.
 
I’m about to give up on my kit, after shutting off the engine and waiting 10, 15 minutes, the ignition module never turns from solid red to flashing red. The camera remains in continuous recoding mode.

Will need to return and exchange for the hardwire kit. Just doesn’t want to work for me.



Sent from my iPhone using Tapatalk
 
Back
Top