Bình tĩnh, từ từ khoai sẽ nhừ.Error
- firmware mismatch, about to shut down
- the firmware channel does not match the device channel, please flash in the corresponding firmware
Pls help me
Unpack the archive. Firmware from the archive "FW96580A.bin " copy to the microsd in the root of the memory card and insert it into the recorder when it is turned off. Next, insert the power and DO NOT press any buttons, and wait for 30-40 seconds. During the update, there will be no messages on the screen about the update, only the LED will light up blue and then red.
ถาวรคงเก็บถาวรจากเดิมคำเดิมถาวร ถาวร "FW96580A.bin" ไม่ต้องใช้ข้อเ...
Bình tĩnh, từ từ khoai sẽ nhừ.เกรงว่าจะเก็บถาวรไว้จากเดิม เก็บถาวร ถาวร "FW96580A.bin" ไฟล์ถาวรที่มีข้อเี... และควรระวัง 30-40 ไม่เกินวิจารณญาน ... กลยุทธ์นี้เหมาะสำหรับผู้เชี่ยวชาญเฉพาะด้าน LED เท่านั้นที่จะสว่างเป็นสีเขียวและควรระวัง ...
วรระวัง 30-40 ไม่เกินวิรณญาณ ... กลยุทธ์นี้ผู้เชี่ยวชาญเฉพาะด้าน LED เท่านั้นที่จะสว่างเป็นควรระวัง...
แกะไฟล์เก็บถาวร เฟิร์มแวร์จากไฟล์เก็บถาวร "FW96580A.bin " คัดลอกไปยัง microsd ในรูทของการ์ดหน่วยความจำ และใส่ลงในเครื่องบันทึกเมื่อปิดเครื่อง ถัดไป เสียบปลั๊กไฟและอย่ากดปุ่มใดๆ และรอ 30-40 วินาที ระหว่างการอัปเดต จะไม่มีข้อความบนหน้าจอเกี่ยวกับการอัปเดต มีเพียง LED เท่านั้นที่จะสว่างเป็นสีน้ำเงินและตามด้วยสีแดง
แกะไฟล์เก็บถาวร เฟิร์มแวร์จากไฟล์เก็บถาวร "FW96580A.bin " คัดลอกไปยัง microsd ในรูทของการ์ดหน่วยความจำ และใส่ลงในเครื่องบันทึกเมื่อปิดเครื่อง ถัดไป เสียบปลั๊กไฟและอย่ากดปุ่มใดๆ และรอ 30-40 วินาที ระหว่างการอัปเดต จะไม่มีข้อความบนหน้าจอเกี่ยวกับการอัปเดต มีเพียง LED เท่านั้นที่จะสว่างเป็นสีน้ำเงินและตามด้วยสีแดง
แกะไฟล์เก็บถาวร เฟิร์มแวร์จากไฟล์เก็บถาวร "FW96580A.bin " คัดลอกไปยัง microsd ในรูทของการ์ดหน่วยความจำ และใส่ลงในเครื่องบันทึกเมื่อปิดเครื่อง ถัดไป เสียบปลั๊กไฟและอย่ากดปุ่มใดๆ และรอ 30-40 วินาที ระหว่างการอัปเดต จะไม่มีข้อความบนหน้าจอเกี่ยวกับการอัปเดต มีเพียง LED เท่านั้นที่จะสว่างเป็นสีน้ำเงินและตามด้วยสีแดง
wait for new firmwareมันยังไม่ทำงาน
tried, not workingTry to hold right button and then connect power.
same problem here could anyone help us please!Error
- firmware mismatch, about to shut down
- the firmware channel does not match the device channel, please flash in the corresponding firmware
Pls help me
Unpack the archive. Firmware from the archive "FW96580A.bin " copy to the microsd in the root of the memory card and insert it into the recorder when it is turned off. Next, insert the power and DO NOT press any buttons, and wait for 30-40 seconds. During the update, there will be no messages on the screen about the update, only the LED will light up blue and then red.
Where and how can i unpacked "FW96580A.bin "? can you send me the link please