F800 PRO: ADAS calibration set to initialize.. and what now?

[lsluijter]

The F800 manual states the following:
6.4.4 Initializing the ADAS calibration setting
Refer to the following instructions to identify your vehicle type for using the ADAS feature.
1 From the mobile viewer, tap Dash Cam Settings > Road Safety Settings and tap the Reset button under
Initialize ADAS.
2 From Initialize ADAS, tap Confirm to proceed with initializing. Tap Cancel to cancel initializing.

I have done that a few weeks ago, but so far nothing happens.
What should I do now?

Loek

 

[Andymc1971]

My camera simply clicks when I’m around half way over the white lines.

Waste of time IMO


Sent from my iPhone using Tapatalk Pro

 

[Nik]

I suppose initializing ADAS is to calibrate the position of the camera, probably more crucial for cameras that are mounted off center. Steps I did: Initialize, choose warning alerts on/off/high-low, set to SUV/Sedan, then start driving on the roads. You should do it when there's light traffic for accurate calibration.

In this video you can see all the ADAS features for the F800 pro:

Hope this helps.