Failed GPS?

fredfox_dashcam

New Member
Joined
Apr 20, 2018
Messages
2
Reaction score
1
Country
United Kingdom
Not sure if I've screwed up a setting somewhere, but GPS isn't logging anymore. I'll got through them again tomorrow, but in the meantime I'd welcome a little advice.

Is there anything in the log file that I can look for that could point to an issue?

Here's an extract .... which say GPS connect, and a couple of lines that it looks like it picked up the time from GPS as well.
Code:
[33mWRN:Ux_GetFocusedWindowWithIndex() Failed

[0m[31mERR:ChgMode_IMX291M() ChgMode_IMX291M to 1...
[0m[33mWRN:Ux_GetFocusedWindowWithIndex() Failed

[0m[33mWRN:Ux_GetFocusedWindowWithIndex() Failed

[0m[33mWRN:Ux_GetFocusedWindowWithIndex() Failed

[0m[33mWRN:Ux_GetFocusedWindowWithIndex() Failed

[0m[31mERR:ChgMode_IMX291M() ChgMode_IMX291M End!!
[0mNO DP cal data
[33mWRN:Ux_GetFocusedWindowWithIndex() Failed

[0m[32m!!----------------------GPS Connect!!
[0m[33mWRN:Ux_GetFocusedWindowWithIndex() Failed

[0m[33mWRN:Ux_GetFocusedWindowWithIndex() Failed

[0m[33mWRN:Ux_GetFocusedWindowWithIndex() Failed

[0mInput_SetKeyMask uiMode:1 uiMask:108b3
Input_SetKeyMask uiMode:0 uiMask:108b3
Input_SetKeyMask uiMode:2 uiMask:108b3
[37mCHK: 861, UIFlowWndMovie_OnOpen[0m
[37mCHK: 140, FlowMovie_DeleteOldFile[0m
[37mCHK: 863, UIFlowWndMovie_OnOpen[0m
[31mERR:GSensor_I2C_Transmit() i2c ret = 2!!
[0m[31mERR:GSensor_I2C_ReadReg() Error transmit data1!!
[0m[35mGSensor_open: GMA301 ulData1 = 0x0
[0m[31mERR:GSensor_I2C_Transmit() i2c ret = 2!!
[0m[31mERR:GSensor_I2C_ReadReg() Error transmit data1!!
[0m[35mGSensor_open: DRAMD07 ulData1 = 0x0
[0m[35mGSensor_open: SC7A30E ulData1 = 0x11
[0m[32mGSensor_open, g_GsensorMaker is SC7A30E
[0mvalue = 0x00
[33mUSB 1.5A
.
...
.....
[0m[32mGet gps date time 2018/9/29 14:31:27
[0m[32mSet gps date time 2018/9/29 15:31:27
 
Hy fredfox.... hope you are still here....
do you remember which settings were wrong / messed up?
My problem seems to be nearly the same, no gps data (Speed/ altitude ...) written in log-files and no track is shown.
 
please check the setting------ GPS STAMPING-----OFF
it should be LOG ONLY (only write log into log files, no stamping to video) or STAMPING ON (stamping the location info on video)
 
Back
Top