Ferrite bead

reconstyle

New Member
Joined
Nov 14, 2019
Messages
15
Reaction score
3
Location
Orlando
Country
United States
Are you guys tucking the ferrite bead (black cylinder thing on power cable) under the headliner when you are installing?

I was trying to see if I could loop the cable inside the wire cover to conceal it in there, but there’s just not enough room to loop the cable around and hide the ferrite along with 2 other plugs.
 
Depends how close the camera is to the top of the window if you can tuck it under the headliner or not
 
The cam will be mounted only about 3 inches down from the top of the windshield, but I was curious if there was enough clearance to tuck it under the headliner.
 
but I was curious if there was enough clearance to tuck it under the headliner.
If you're asking if there's enough room above the headliner to fit it that would depend on the vehicle - some may have enough, others not.
 
They should all have enough room above the headliner to tuck it away. That’s how I’ve installed the three different cars I’ve set up.
 
mine fits with a bit of a bump there
 
Back
Top