I've been using Firmware 2.61 since Aug. 3rd with no issues.
Here is my complete data on my A119S.Viofo A119S Dash Cam As of Aug 28, 2018
VIOFO A119S, V2, 7G F1.6 Lens , Sony Exmor IMX291 Sensor, c/w GPS and CPL filter, purchased Aug. 14, 2017 on eBay.ca
Firmware A119S_180730_V2.61 installed Aug. 3, 2018
Micro SDHC Card: Kingston Canvas Go! 32GB 90MB/s, Class 10 UHS-I U3
31 Menu Settings below:
01 RESOLUTION – 1920 x 1080p 60fps
02 LOOP RECORDING – 5 minutes
03 EXPOSURE – +0.0 and occasionally -0.1/3 in summer
04 WDR (Wide Dynamic Range) – ON
05 OFF - PARKING MODE
06 OFF - Time Lapse
07 OFF - Motion Detection
08 GPS – On
09 SPEED UNITS – kph
10 G SENSOR – Medium
11 OFF - LDWS (Lane Departure Warning System
12 OFF - FCWS (Front Collision Warning System
13 DATE STAMP – ON
14 OFF - GPS STAMP (Coordinates, Speed)
15 CAMERA MODEL - ON
16 RECORD AUDIO – ON
17 SCREEN SAVER – 3 minutes
18 BOOT DELAY – 5 seconds
19 OFF - LED
20 DATE & TIME – ON
21 TIME ZONE – -4 Daylight Saving, change to -5 for Standard Time
22 LANGUAGE – English
23 BEEPING SOUND – All ON
24 FREQUENCY – 60Hz for North America
25 OFF - Image Rotate
26 FORMAT – Manually, twice a month or before long trip
27 OFF - Format Warning
28 DEFAULT – Used only when updating firmware.
29 CAR NAME – Entered License plate
30 Not used - CUSTOM TEXT
31 FIRMWARE VERSION – A119S_180730_ V2.61
I just got back from a 4 day road trip and the A119S with Firmware 2.61 worked as its supposed to.
I hear the chimes when it boots up and the Beeping sounds when I push the Record and Menu buttons to Format the micro sdhc card.