Firmware for manual reflash

[aoxzhou007]

Hey guys, I have a M800 dashcam, but it’s the Chinese version, so the language is in Chinese. I was wondering if anyone could share an English firmware file with me so I can flash it.
Since I’m new to this, I’m not entirely sure if there are any important things to keep in mind when flashing—such as whether I can only flash from a lower version to a higher version.
Also, I noticed that for some 70mai models, the hardware differs between the Chinese version and the international version. Does the M800 have the same hardware for both versions? If the hardware is different, would that prevent me from flashing it successfully?
Thanks in advance for your help—this is my first time posting here.

 

[hieppg]

M800 Chinese and M800 global are different. Anyway, for all current 70mai dashcams, it's not possible to update a global firmware into a China local dashcam anymore.

 

[Chuck McCoy]

I have a M800 dashcam, but it’s the Chinese version, so the language is in Chinese. I was wondering if anyone could share an English firmware

M800 Chinese and M800 global are different. Anyway, for all current 70mai dashcams, it's not possible to update a global firmware into a China local dashcam anymore.

@Oliver_70mai
This is why I do NOT support 70mai products for USA / Canada customers, (dash cam battery pack OK).

1.) Stop region locking devices
2.) Stop different firmware versions based on country
3.) Stop requirement to change settings & download videos with APP;
a.) Customer Email Address
b.) Customer Log-in requirement
c.) Customer Password requirement
-Chuck

 

[lisabon_Q3]

Hey guys, I have a M800 dashcam, but it’s the Chinese version, so the language is in Chinese. I was wondering if anyone could share an English firmware file with me so I can flash it.
Since I’m new to this, I’m not entirely sure if there are any important things to keep in mind when flashing—such as whether I can only flash from a lower version to a higher version.
Also, I noticed that for some 70mai models, the hardware differs between the Chinese version and the international version. Does the M800 have the same hardware for both versions? If the hardware is different, would that prevent me from flashing it successfully?
Thanks in advance for your help—this is my first time posting here.

The M800 storage is write-protected when the M800 is connected to a PC, so you cannot copy the firmware to the device's internal memory.