Floats FOCUS

gse

Well-Known Member
Joined
Oct 22, 2013
Messages
769
Reaction score
899
Country
Russian Federation
Dash Cam
Viofo 119V3
Good evening, since the Viofo representative does not respond to private messages, we decided to raise the issue for discussion and correction. So, it's no secret that the 119S has soap, left and right, including my registrar, that's a problem. Did a test out of focus, and oh my god, it floats. When heated, the picture is covered in soap, this is due to the plastic holder, which is made of very thin plastic. IT IS NECESSARY To put METALLHOLDERS otherwise there will be problems in the heat.
Where can I buy original metal holder for Viofo 119S???
What are the dimensions of the original holder???

5.jpg
 

Attachments

  • 6.jpg
    6.jpg
    395.7 KB · Views: 30
  • 3.jpg
    3.jpg
    283 KB · Views: 29
  • Фокус в норме.1.jpg
    Фокус в норме.1.jpg
    347.6 KB · Views: 28
  • Расфокус.1.jpg
    Расфокус.1.jpg
    272.5 KB · Views: 31
Last edited:
that's not russian language... :eek:
 
what language do you speak?
 
твои посты не на русском, поэтому трудно понять, что ты пытаешься сказать.
 
твои посты не на русском, поэтому трудно понять, что ты пытаешься сказать.
Maybe it is ukranian or bulgarian?
 
:) камеру надо крепить на лобовое стекло, на картинке должен быть виден капот, и (снизу вверх, примерно) 60% дороги + 40% выше горизонта.
 
Russian, according to google translate. Translated text:

Good evening, as the representative of Viofo does not respond to private messages, they decided to put the question for discussion and correction. So, it's no secret that 119S has soap, left and right, including my registrar, it's a problem. She made a test for defocusing, and Oh, God, he floats. When heated, the picture is all in soap, it's connected to a plastic holder that is made of very thin plastic. It is necessary to put METALLHOLDERS otherwise there will be problems in the heat.
Where can I buy an original metal Holder ??? I'll fix it myself!
What sizes does the original Holder have ??​
 
Слава России!
 
  • Like
Reactions: gse
Russian, according to google translate. Translated text:

Good evening, as the representative of Viofo does not respond to private messages, they decided to put the question for discussion and correction. So, it's no secret that 119S has soap, left and right, including my registrar, it's a problem. She made a test for defocusing, and Oh, God, he floats. When heated, the picture is all in soap, it's connected to a plastic holder that is made of very thin plastic. It is necessary to put METALLHOLDERS otherwise there will be problems in the heat.
Where can I buy an original metal Holder ??? I'll fix it myself!
What sizes does the original Holder have ??​
and according to my russian-english it's hard to understand too. :eek:
 
Слава России!
good.gif
clapping.gif
 
Compare photos, one is good, the second is soap
 
Last edited:
Сравнивайте фото, одно хорошее, второе мыло.
если проблема в камере, обе картинки будут одинакового качества.
 
Если проблема в камере, обе картинки будут одинакового качества

No, the first file was made when turned on (cold), the second after 50 minutes of shooting, i.e. the registrar has warmed up, the holder is made of plastic, this is physics.
 
Last edited:
а регистратор какой?
 
с какого языка ты переводишь на русский?!
 
119S

I don't translate anything, Google Chrome does it, I write in Russian
 
Last edited:
так отключи коррекцию.
если ты такие же посты к Viofo пишешь, неудивительно, что тебя не понимают.
 
Last edited:
Отключил.
 
Back
Top