Hi. I got my new Git1. It works pretty much as expected. My primary use is as dashcam so I prefer hyperfocal focus distance. I have noticed that focus plane is not aligned with sensor on mine. It is most noticeable in close focus. This is a still from video, about 15cm from 24 inch screen displaying my test chart that I use for DSLR lens testing:
you can see right side is very sharp (even Bayer demosaicing and sharpening artifacts are visible). Left side is soft.
Left side becomes almost comparably sharp as right one at around 80cm distance.
At far distance this reverses: left side is very very sharp, right side is slightly soft, but still usable:
Crops from still from video (plate is about 9m from camera):
Notice also how trees are softer on left side.
I'm considering to get a replacement. Local company I got it from advertises 24-hour replacements for faulty ones.
But I wonder: what focus range is on your's Git1?
you can see right side is very sharp (even Bayer demosaicing and sharpening artifacts are visible). Left side is soft.
Left side becomes almost comparably sharp as right one at around 80cm distance.
At far distance this reverses: left side is very very sharp, right side is slightly soft, but still usable:
Crops from still from video (plate is about 9m from camera):
Notice also how trees are softer on left side.
I'm considering to get a replacement. Local company I got it from advertises 24-hour replacements for faulty ones.
But I wonder: what focus range is on your's Git1?