Hardwire connection issues

New2020

New Member
Joined
Jun 12, 2019
Messages
19
Reaction score
1
Location
Australia
Country
Australia
Need Abit of guidance trying to hardwire my dashcam.

Connected the ACC cable (red) to fuse for the rear wiper (not specced) and the earth cable to the metal bolt. Yet no power.

Any ideas where I went wrong?
 

Attachments

  • 8E39C1DA-0B4C-4ECF-971E-31D7CFF197CD.jpeg
    8E39C1DA-0B4C-4ECF-971E-31D7CFF197CD.jpeg
    298 KB · Views: 13
  • 411A74B1-8F28-44C3-AACC-A7A8FFAA2108.jpeg
    411A74B1-8F28-44C3-AACC-A7A8FFAA2108.jpeg
    466.1 KB · Views: 14
  • F24691D7-31AE-49B5-A163-2CCA98311066.jpeg
    F24691D7-31AE-49B5-A163-2CCA98311066.jpeg
    152.7 KB · Views: 13
Just so there is a record in this thread also, I can confirm now that all wires in the DDPai 3 wire, hard-wire kit need to be connected for the camera to turn on.
 
Back
Top