unagomadeborrar
New Member
Hi there, I have a 2019 Mercedes GLC300 that I had a shop hardwire and conceal using the 3-wire kit. SD card working and formatted. Latest firmware V1.8. The car never appears to enter parking mode from what I can tell and it is just constantly recording 24/7. My garage is completely closed. The power cable is attached directly to the side port (below AV port). I never hear any beeping when the car engine is cut off.
I have attached a photo. What do the two icons in the top left corner mean in the photo that I have? I set parking mode to "auto event detection" which I believe is supposed to be a person symbol with a P in the top left. However, I have never seen this. It is constantly this car with a recording symbol which I believe is drive mode. What could be the issue? Thanks in advance.
I have attached a photo. What do the two icons in the top left corner mean in the photo that I have? I set parking mode to "auto event detection" which I believe is supposed to be a person symbol with a P in the top left. However, I have never seen this. It is constantly this car with a recording symbol which I believe is drive mode. What could be the issue? Thanks in advance.
Attachments
Last edited: