Hey guys, I have a Toyota Corolla S 2015 and I'm trying to hardwire my BlackSys CF-100 dash cam for parking mode when the ignition is off. I'm using this battery discharge prevention device (Lukas LK-290-12/24VT) and two fuse taps for the ACC and battery power (with a 5A fuse in the top spot). I attached an image of the interior fuse box.
I've attached the red wire fuse tap to the ACC fuse slot and the battery power fuse tap to the STOP fuse on the interior fuse box, and the ground wire to a metal screw on the chassis. The dash cam is working while the ignition is off, but when I try to leave the car it beeps and displays a message to turn off the power. It won't allow me to lock the car until I turn off the LK-290. Any ideas what is causing the issue?
Edit: fuse box image attached.
I've attached the red wire fuse tap to the ACC fuse slot and the battery power fuse tap to the STOP fuse on the interior fuse box, and the ground wire to a metal screw on the chassis. The dash cam is working while the ignition is off, but when I try to leave the car it beeps and displays a message to turn off the power. It won't allow me to lock the car until I turn off the LK-290. Any ideas what is causing the issue?
Edit: fuse box image attached.
Attachments
Last edited: