Hi guis,Need Help.My gitup F1 Stuck in Boot Logo.

[Backdoor.X]

Hi guys,I need some help for my Action Camera Gitup F1.is almost 1.5 yeras old.Wich seems to be unusable anymore,camera has start problems.The first problem come when i try to start wi-fi from camera menu,wich is not start even if i enable,this is wierd and after a while,when i try to turn on camera is stuck on boot Logo.and i cannot turn off.i have to take out battery and insert again with same results.and if a plug a usb cable in camera got same results,she is start itself in boot logo.Any help would be appreciated! If i put this thread in a wrong area please move to right place,Thanks!

 

[TonyM]

Have you tried reinstalling the firmware? Copy a FW .bin file to the micro SD card, put it in the camera then turn it on.

 

[Backdoor.X]

Yes,i also done this,i put FWF1.bin in root microSD(Fat32),and no success.i start camera and is only displayed GitUp.and is staying like this until i take out the battery.i also have no Led blinking red or blue,if i connect a usb cable i hear windows notification sound and camera its not start-up.if i start camera connected with usb cable,is start with full icon battery and both red led light(not blinking).i will try to open camera to take a look inside.Any ideea?Thanks!

 

[TonyM]

I don't think you will achieve anything by opening the camera. If you do, take care not to pull the WiFi aerial off the PCB when you separate the two halves.

Perhaps @gitup can offer some advice to fix your camera

 

[Backdoor.X]

I opened the camera, I couldn't find who knows what, but I found this clock Back-up small battery that looks oxidized, I measured with the multimeter and it has somewhere at .0732 mV. And I think it would normally be somewhere at 3.3 V. I unsoldered it and soldered 2 wires in its place where I added the outside current just to do a test, but the result was the same, it started and stayed locked in the Boot logo, the camera being small and compact, with insufficient cooling space, I think that due to overheating, one of these integrated circuits (Ambarella A12 or Chipsip CT49 ...) may have been detached. .When I have more time I will do a reflow to these IC.